After launching their 22nm tri-gate high-performance logic product back in the spring, Intel have been promising to show off their SoC derivative, and Dec 10th was the day at the 2012 IEEE International Electron Devices Meeting. 
As you can see from Table 1, we now have six transistor options; the high-voltage transistors use a thicker gate dielectric stack (Fig. 1), and the gate pitch and gate lengths have been tuned to suit the end purpose, and of course there is some (unspecified) source/drain engineering.
logic (top) and high-voltage (bottom) transistors 
If I read the paper correctly, the SoC process can incorporate up to twelve metal layers, with up to six 1× layers, and an extra 3× level, but only one 4× level (Fig. 2). When it comes to the passives, the same MIMCAP layer is used as we saw in the CPU together with similar finger capacitors to the 32nm SoC; inductors are also formed in the 6 μm thick top metal; and there are precision resistors available.
A bunch of SRAM cells are offered, both six- and eight-transistor varieties, with the 6T cells ranging from the minimal 0.092 to 0.13 μm2. These show the quantization of the transistor size quite nicely — if you look closely at Fig. 3, you can see that the number of fins used for each transistor increases with the size of cell, with the exception of the T3 and T4 PMOS pull-up devices, which only have one fin.
high density / low leakage (HDC), low voltage (LVC), and high performance (HPC) 
Overall Intel claims a 100-200 mV reduction in Vt for all transistor types, leading to a ~40% reduction in dynamic power.
Intel is trying to catch their SoC schedule up with the CPU launches, so we will likely see 22nm SoC chips next year, and the 14nm CPU and SOC processes should be launched in parallel, theoretically by the end of 2013.
 C-H Jan, IEDM 2012 pp. 44-47