| |
|
|
| |
Recently Released Reports
The following reports have been completed and shipped.
|
| |
|
| |
|
 |
Broadcom, BCM4325 IEEE 802.11a/b/g MAC/Baseband/Radio with Integrated Bluetooth 2.1 + EDR and FM Receiver Functional Analysis Report - Advanced FAR-0810-801
Publish Date: 10/1/2008
Description: The Broadcom BCM4325 family of single-chip devices provides for the highest level of integration for a mobile or handheld wireless system, with integrated IEEE 802.11a/b/g (MAC/Baseband/Radio), Bluetooth 2.1 + enhanced data rate (EDR), and FM receiver. This provides a compact small form factor solution with minimal external components to
drive the...
|
|
|
| |
|
Volterra, VT1195, Buck regulator, Process review with TEM option PPR-0809-801
Publish Date: 9/19/2008
Description: The VT1195SF is a synchronous buck voltage regulator, which can be used as a stable voltage source in microprocessors, memory, network, and graphic processors found in personal computers, workstations, servers, data networking and enterprise storage systems.
Features of the VT1000 Family of Multi-Phase, Synchronous Buck Voltage Regulator Chipsets include:
-Input Voltages: 5V & 12V
-Programmable Current Over 100A
-Fixed Output Voltages: 1.8V, 2.5V, 3.3V, & 5V
-VOUT & VID Selection
-VRM10.x, VRM9.x, VRM 8.x
-Opteron, Power Pod
-0.8V to 1.85V Range
.
The VT1195SF was fabricated using three levels of aluminum based metallization and
one level of top redistribution layer (RDL), in a single poly, 0.5 µm CMOS process.
Also Available
Circuit Analysis Report - CAR-0806-902
|
|
|
| |
|
Microsoft / TSMC, X02170-001, Graphics Processing ASIC with eDRAM, Focused Process Review PPR-0809-802
Publish Date: 9/16/2008
Description: The Microsoft X02170-001 eDRAM is a TSMC fabbed, 100 Mb embedded DRAM
cache supplied with the Microsoft X81048-002 graphics processing unit. The
device was made using an eight metal, 90 nm CMOS process.
|
|
|
| |
|
STMicroelectronics LISY300AL gyroscope, MEMS process review MPR-0809-801
Publish Date: 9/15/2008
Description: The LISY300AL is a low-power single-axis yaw rate sensor. It includes a sensing element and an IC interface able to provide the measured angular rate to the external world through an analog output voltage.
The sensing element, capable of detecting the yaw rate, is manufactured using a dedicated
micromachining process developed by ST to produce inertial sensors and actuators on silicon wafers.
The IC interface is manufactured using a CMOS process that allows a high level of integration to design a dedicated circuit which is trimmed to better match the sensing element characteristics.
Also Available
An ICInside Surveyor Report giving you 100% measurability across every feature on the MEMS Structure - ICS-0809-801
For a full list of Gyroscope reports please search the Chipworks Report Library
|
|
|
| |
|
STMicroelectronics, LISY300AL, MEMS Gyroscope, ICInside Surveyor Report ICS-0809-801
Publish Date: 9/12/2008
Description: The LISY300AL is a low-power single-axis yaw rate sensor. It includes a sensing element and an IC interface able to provide the measured angular rate to the external world through an analog output voltage.
The sensing element, capable of detecting the yaw rate, is manufactured using a dedicated
micromachining process developed by STMicroelectronics to produce inertial sensors and actuators on silicon wafers.
The IC interface is manufactured using a CMOS process that allows a high level of integration to design a dedicated circuit which is trimmed to better match the sensing element characteristics.
Also Available
A MEMS Process Review on this Device - MPR-0809-801
|
|
|
| |
| |
|
| |
|
|
